Static in the USB Slots

2003 Story Set

Date: December 22, 2003
      First Eudora hung up on checking email so I quit and tried to restart the G4.
      That didn't work.
      Type 1 error - application unexpectedly quit ----.
      So I hit restart.
      And then turned the external modem on and off. (Never use an external modem. And I thought failing internal modems were bad.)
      And then I brought up the control panel and tried to connect.
      "Insufficient memory".
      Like ____! Not with 1/2 Gig!
      So I flicked it off and on again (closing the control panel first).
      Nada.
      I restarted again.
      No joy.
      So I shut down (a full cold start).
      Nada.
      I redid the restart scenario.
      Each time it takes a number of steps once the system boots.
      Each time takes several minutes.
      This time I got a "not enough power to USB device xxxx whatever".
      AHA!
      The culprit.
      So I unplugged the modem (switched the slot with another USB device) and checked the mouse connect.
      Restart.
      Success.
      Took 30 minutes.
      YUCK!
      I need the G5 up and running!!!!
      USB slots occasionally build up static and need to be unplugged and replugged in
      Ridiculous!
     
      So glad I am an engineer ---- I TRY to teach these guys to do it right!!!
      These G4 designers were not MY students!

www.Donnamaie.com home page

Main Story Index


Copyright 2003, 2002, 2001, 2000 Donnamaie E.White.
Material may not be reproduced without written permission of the author.

For information about this file or to report problems in its use email dew@Donnamaie.com